utc MPSA94 pnp epitaxial silicon transistor utc unisonic technologies co. ltd 1 qw-r201-021,a high voltage transistor features *collector-emitter voltage: v ceo =-400v *collector dissipation: pc(max)=625mw *low collector-emitter saturation voltage applications *telephone switching *high voltage switch to-92 1 1:emitter 2:base 3:collector absolute maximum ratings ( operating temperature range applies unless otherwise specified ) parameter symbol rating unit collector-base voltage v cbo -400 v collector-emitter voltage v ceo -400 v emitter-base voltage v ebo -6 v collector dissipation(ta=25 c ) pc 625 mw collector current ic -300 ma junction temperature t j 150 c storage temperature t stg -55 ~ +150 c electrical characteristics (tj=25 c,unless otherwise specified) parameter symbol test conditions min typ max unit collector-base breakdown voltage bv cbo ic=-100 a,i e =0 -400 v collector-emitter breakdown voltage bv ceo ic=-1ma,i b =0 -400 v collector-emitter breakdown voltage bv ces ic=-100 a,v be =0 -400 v emitter-base breakdown voltage bv ebo i e =-100 a,ic=0 -5 v collector cut-off current i cbo v cb =-300v,i e =0 -100 na collector cut-off current i ces v cb =-400v,v be =0 -1 a emitter cut-off current i ebo v eb =-4v,ic=0 100 na dc current gain(note) h fe v ce =-10v,ic=-1ma v ce =-10v,ic=-10ma v ce =-10v,ic=-50ma v ce =-10v,ic=-100ma 60 70 70 40 300 collector-emitter saturation voltage v ce (sat) ic=-10ma,i b =-1ma ic=-50ma,i b =-5ma -0.20 -0.5 v base-emitter saturation voltage v be (sat) ic=-10ma,i b =-1ma -0.75 v output capacitance cob v cb =-20v,i e =0, f=1mhz 7 pf note:pulse test:pw<300 s,duty cycle<2% .com .com .com .com 4 .com u datasheet
utc MPSA94 pnp epitaxial silicon transistor utc unisonic technologies co. ltd 2 qw-r201-021,a typical parameters performance -1 -10 -100 -1000 1 10 100 1000 ic,collector current(ma) h fe ,dc current gain fig.1 dc current gain ic,collector current(ma) -1 -10 -100 -1000 ic,collector current(ma) -1 -10 -100 -0.01 -0.1 -1.0 -10 -0.01 -0.1 -1.0 -10 v be (sat) (v) fig.2 base-emitter saturation voltage v ce (sat) (v) fig.3 collector-emitter saturation voltage fig.4 collector output capacitance 1 10 100 1000 -100 -10 -1 -0.1 collector base voltage(v) collector output capacitance(pf) v ce =-10v ic=10*i b ic=10*i b i e =0,f=1mhz utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. .com .com .com .com 4 .com u datasheet
|
